pH WalkLABARD Microprocessor pH Meter (LTI9000pH)

Advance Microprocessor pH/ORP Meter (LI-1122 pH)

May 14, 2016

N.A (LIM-187)

May 15, 2016

pH WalkLABARD Microprocessor pH Meter

PRODUCT DETAILS

Ease of use
Automatically locks reading when a stable reading is established. This feature can be disabled to allow continuous reading display.

Automatic shut-off
Meter automatically shuts off after 5 minutes after the last key command. This feature can be disabled while reading in continuous read mode.

One-touch calibration
The meter’s one-touch auto-calibration procedure uses only one button to activate the mode. The unit will prompt and confirm offset and slope point calibration.

SPECIFICATIONS

Specification

	pH	Mv	Temperature
Range	0 to 14 pH	± 1999 Mv	0 to 100⁰C
Resolution	0.01 pH	1 Mv	0.1⁰C
Accuracy	±0.01 pH	± 0.1 mV	± 0.5⁰C
Temperature Compensation	Automatic or Manual from 0 to 100⁰C	Automatic or Manual from 0 to 100⁰C	Automatic or Manual from 0 to 100⁰C
Operating Temperature	0 to 50⁰C
Operating Humidity	Maximum 90% Relative Humidity	Maximum 90% Relative Humidity	Maximum 90% Relative Humidity
Slope Recognition	± 20% pH 4 & pH 10	–	–
Offset Recognition	± 60 mV at pH 7	–	–
Input Impedance	10¹² ohms	–	–
Battery Type	DC9V (1604 A, 6LF22 or equivalent)	–	–
Battery Life	Approximately 200 hours	–	–
Size	164 x 83 x 35 mm	–	–
Weight	350 gm (main unit including battery)	–	–

ACCESSORIES

Accessories

Main Instrument
Epoxy body combination pH electrode.
pH Microprocessor temperature probe (S.S)
Buffer solution pH 7.00 (90 ml)
Buffer Solution pH 4.01 (90 ml)
Carrying Case
Operation Manual

Enquiry